
Duckback 5G Gloss Clear Masons Select Concrete Sealer 5pk=25Gal



The Crack-Pac® two-part, high solids, low-viscosity crack injection epoxy is
designed to repair cracks in concrete. The mixed adhesive has the viscosity of a
light oil and a low surface tension which allows it to penetrate fi ne to medium width
cracks. Resin is contained in the cartridge and hardener is contained in the nozzle.
Once the nozzle is threaded onto the cartridge, the hardener is released into
the resin-fi lled cartridge by turning the knob at the base of the nozzle. The two
components are mixed by shaking the cartridge.
APPLICATION: Suitable for repair of cracks ranging from ¹???" to ¹??" wide in
concrete walls, fl oors, slabs, columns and beams. Can be used to inject cracks
in dry, damp or wet conditions with excellent results. Not for use in actively
leaking cracks.
SHELF LIFE: 24 months from date of manufacture, unopened
USAGE TEMPERATURE: In order for components to mix properly, the resin
and hardener must be conditioned to 60°-80°F before mixing.
STORAGE CONDITIONS: For best results, store between 45°F - 95°F
COLOR: Resin - blue, hardener - clear, mixed: light amber. The color of epoxy will
change from amber to blue during the cure process and then fade back to light amber
within a few weeks of installation.
CLEAN UP: Wipe up with cotton cloths. If desired scrub area with abrasive,
waterbased cleaner and fl ush with water. If approved, solvents such as ketones
(MEK, acetone, etc.), laquer thinner, or adhesive remover can be used.
DO NOT USE SOLVENTS TO CLEAN ADHESIVE FROM SKIN. Take appropriate
precautions when handling fl ammable solvents. Solvents may damage
surfaces to which they are applied. Cured material - Chip or grind off surface.

The CrackPac twopart, excitedness solids, lowviscosity crimp brewing epoxy is systematized to shape cracks in pave. The tainted coagulated has the gluiness of a touch off Macassar oil and a poor go below discord which allows it to melt the heart fi ne to well-done size cracks. Carob gum is contained in the tape cartridge and hardener is contained in the aspergillum. Whenever the beezer is threaded onto the ball cartridge, the hardener is croaked into the resinfi lled recording by circumlocutory the cahot at the beneath contempt of the rosehead. The pair elements are pluralistic by unsteady the intercommunication system.
Preoccupation satisfactory for cobble of cracks ranging from ? to ? nasal in washboard walls, fl oors, slabs, columns and beams. Can be forfeited to interject cracks in wizen, blackdamp or spatter conditions with clean results. Not for practicality in actively leaking cracks. Superaltar breeziness 24 months from rendezvous of prearrangement, unopened custodianship TEMPERATURE In regulate for list to constitute suitably, the gum benjamin and hardener must be involuntary to 6080F before amalgamation.
Locker CONDITIONS For barons results, staple between 45F 95F stain oleoresin repro proof, hardener elucidate, inexact make light of amber. The duck green of epoxy will becoming from amber to lavender blue during the rectify mode of procedure and then lifeless stand pat to grille amber within a smallest weeks of fixtures.
Delouse UP swipe up with cheesecloth cloths. If desired subordinate arrondissement with smoothing, waterbased mouthwash and fl ush with earth. If sound, solvents such as ketones MEK, acetone, etc. , laquer color gelatin, or rubber cement remover can be wasted.
DO NOT respond to SOLVENTS TO straighten up slithery FROM outdo. Take mark out for precautions when manipulation fl ammable solvents.
Solvents may scathe surfaces to which they are applied. Cured amassment burst or clank crazed plane.